La³ all the way (lalala sepanjang jalan)

A Conning rod

2009-09-06T01:37:00.012+08:00

Exactly 9 days after the thieving incident, reaching the Bukit Jalil - Seri Petaling intersection from a meeting with fellow 0-100.com forummer; an unfamiliar noise being heard from the engine bay. Though throttle response was normal, the sound was a bit more louder than it supposed to be.

Worrying that the piston could be shattered, slowly I drove the car to Ganu's place (Ganu aka Mitsubishi) for his review on the case. He confirmed that the conrod's bearing is out of place. Gosh. August have not been kind to me. I'm pretty upset but knowing that it could've been worse, I'm set for development on this block since I already had the plan to overhaul for quite sometime.

The car stalled in EB One for 4 days, so I drove carefully to a friend's workshop nearby Hicom Shah Alam to engage the repairs. After bringing down & disassembly of the engine, looks like conrod no 4 is badly damaged & needs to be replaced. Quickly I searched through Mudah.my & saw an ad selling set of 4G93 pistons + conrods. Turns out it is the same person I dealt earlier to get a backup crankshaft.

Dead conrod

I took the rocker head for some colouring project while Alvin sent the engine parts to the machine shop where they confirmed a few things:

Crankshaft need to be shaved & polished
Current conrods are all goners!

Luckily I had the set of conrods, so that already save me big time. The crankshaft however, is going be shaved & not replaced which means it will be fit with a specially measured bearing for conrod no. 4. So, I'm going with ACL Aluglide set for this session.

To be continued...

D*mn Buggers

2009-09-02T15:06:00.009+08:00

Earlier this month, about 2 weeks before the reach of Ramadhan, my car was breach by riding robbers! The driver side window was wrecked (luckily my tint still holds the breaking portion). They stole a gadget inside of the glove box, along with my gear knob. Gear knob??
Many suspect that this could have been insider's work, from where could it be prolly the workshop that installed the gadget itself but who knows.

According to a maid of a neighbour which is also the only eye witness during the incident, there were 2 men on motorcycle that produced the tragedy, which could probably be Indonesian. It was around 2.00pm in the afternoon when it happpened.

Seeming there's an intake manifold at the backseat, the robbers only took whatever convenient most to handle but they do possess the knowledge on the gadgetry since it the socket was detached without any trace of snaps...

Just some pics for viewing pleasure...

Broken

Mess

Under the hood 1

2009-08-25T01:59:00.009+08:00

I've been thinking about changing the tower strut for a while, so I crossed a half-cut store that sells few adjustable Cusco struts matching the mounting specs for a Putra. The one I had in the bay (looks like Hurricane tower bars sold in ENEOS) is already distorted due to flexes taken on hard driving days, where it also marked a scratch underneath the front hood.

Bought the used strut for RM200, which I reckon can get cheaper about RM150 at some other shop. Guess I was just to lazy to joust into a bargain :P

So I had it replaced on a fine day during wheel balancing at a tyre shop, earlier this month.

Mounted tower brace

A few days ago, I bought some pre-cut hood sound dampeners from Brothers Accessories Shop in Kelana Jaya, so I just took my time pasting it underneath the hood to further help insulate the engine noise when it's running. Cost is quite cheap which is RM38 for a stock Proton Wira / Satria / Putra front hood. Just for reference, same insulation material retails at RM35 per square meter. The material looks & feels of an OK quality for the price offered.

Sound dampeners (insulation)

I wiped all access grease underneath the hood. Any tough grease got a good help from WD40 for removal & get the surface squeaky as much as I can with a dry cloth.

Day 1

Day 1: Halfway

Day 2: Completed

As we can see everything fits into place accordingly. Not too shabby eh?

Face-Lived

2009-08-25T01:31:00.005+08:00

After sometime, the car's paint seems to be a bit in disorder due to peeled skin & unwanted scratches which oversees the true religion of the paint nature.
I had again ordered a touch-up activity from Din (my occasional spray painter) to help me about it.

Few things had been re-sorted:

replacement of side skirts (Poly Urethane Perdana V6's trimmed length)
installation of door trim (lining) with custom rear fender lining
replacement of Asti Spoiler with custom duck tail version (non-Batman or so-called Asti-Z)
refinement on front lips mount & paint work

Replacement of spoiler includes tampering the mounting holes with steel for permanent seal.

The works started on the 10th this month but seemed to dragging until Saturday, 15th since the rain was up & about during the works. Due to lack of sheltered ground, the works only completed that night about 1 am, when I was finished with my badminton activities @ New vision courts in Petaling Jaya with fellow ex-university mates.

Cadangan yang sama

2009-07-06T21:28:00.006+08:00

Sejak akhir-akhir ni aku di hujani isu yang sama je... jumpa org ni tanya soalan tu. Jumpa minah ni cakap macam tu. Jumpa kawan aku pun bagi cadangan yang sama. Cadangannya ialah,

"Tukar je la kereta baru."

Hehe, aku bukan tak berkenan nak tukar kereta lain, tapi aku sayang keta aku ni. Enjin jarang bermasalah, cuma kadang-kadang je merengek. Biasalah, umur lanjut skit. Bayangkan, hari-hari dapat jumpa pun aku masih nak keluar dengan kereta aku jugak. Sebab itulah ramai lelaki panggil kereta tu bini, sedangkan isteri di rumah pun belum tentu nak jumpa hari-hari! Kalau dah menyampah macam tu lah...

Walau bagaimanapun, aku rasa suatu hari nanti aku akan beli kereta lain jugak. Samada kereta ni aku simpan ke tak tu blakang cerita la tapi sentimental dah tentu kaw-kaw punya, dah lama bercinta la katakan.

2 orang manager kat bahagian Business Development opis tempat aku kerja sekarang ni pun asik la pancing aku beli Evo... kalu aku cap duit aku memang dah sental dah Evo Meebo ni.

"At least masuk turbo... 4G63 laa tak pun GSR", kata Mr Z no.1 & Mr Z no.2.
Sama je otak dua-dua. Mana taknya, sorang bawak Evo VII, assistant-nya plak bawak STI ver8... Cis dunia memang tidak adil....

Sekian aje aku membebel sensorang kali ini. Kalu ada lain kali nanti aku bagitau. Aku bagitau sini je laa, korang bukan nak amik tahu sangat pun.

Project S?

2009-03-31T00:42:00.005+08:00

Adjustable coil-overs have always been the fond of basic handling modification. As I treat myself to getting used to ride-stiffness by changing springs, I finally came to my senses of installing hi-low adjustable absorbers.
Project S of Taiwan is a newly introduced brand, which I'd say I'm satisfied with the setting & its material are acceptable if not on par with common brands like GAB or HWL. Spring rates goes 6kg (front) - 4kg (rear) which are pretty ideal to my preference.
A colourful & catchy set, how it caught my attention earlier. Was inducted by fellow ZTH forummer. Installation was later carried out by ATS Automobile in Sunway.

Thanks for the bargain, Andy.

Daily confusion

2008-10-13T11:46:00.003+08:00

As I was sorting out my work clothes, I came to a realization that I have a complete set of 1 month 5 days-a-week formal clothing to dispense... I think I might become more lazy to iron the shirts from now on :p

The shiny ones are Baju Melayu laa...
Feel like a girl's collection... biasa la gals kan suka beli baju

Semakan Raya

2008-10-06T14:30:00.009+08:00

Setelah semakan dibuat, rupanya beta punya rim 14 inci Racing Turismo yg bermasalah... berlaga dengan brake calipers. Selepas ujikaji di jalanraya dengan mengenakan rim 15 inci, masalah tidak lagi dihadapi. Walau bagaimanapun, semakan selanjutnya tetap dibuat pada bahagian bawah kenderaan.

Imej 1: Bush Lower Arm Kanan

Imej 2: Bush Lower Arm Kiri

Dari kedua-dua imej bushing yang ditunjukkan, kedua-dua getah bushing itu sebenarnya berkeadaan baik, cuma besi housing getah itu saja yang terkepak sedikit. Kena sesuatu kot. Jadi, tak perlu ditukar. Instead, bila dah check rupa-rupanya lower arm kanan tersebut memang longgar sikit pada absorber arm mount (aku belasah je istilah ni).
Bagi meningkatkan lagi keyakinan beta yang masih amatur, beta juga dinasihatkan untuk menukarkan bush 'sate'. Bush 'sate' ini adalah getah alas untuk besi pengikat lower arm dengan sway bar (lihat gambar dibawah);

Imej 3: Bush 'sate' yang agak lemau keadaannya

Imej 4: Bush 'sate' yang segar bugar setelah ditukar

Kini pemanduan beta adalah lebih bergaya & lebih rempit-able di selekoh-selekoh favourite.

Lazy & Malas

2008-09-25T11:40:00.003+08:00

Masuk semalam dah 5 hari marathon CS berlangsung. Letih nak mampus pada paginya menyebabkan keliatan yang teramat nak pergi kerja. Mandi pun ala-carte je. Selalu tu sempat je syampu ketiak sekali.
Pagi semalam mmg terus fail, sakit kepala sampai ke petang. Nak makan panadollah sayang plak sebab masih puasa, nak pergi jumpa doktor pun malas, jadinya tidurlah sampai ke malam. I mean, lepas berbuka sambung tidurlah. Tengahari tu aku sempat tonton filem Notting Hill lakonan Hugh Grant & Julia Roberts, teringat pada sikap lama aku yang suka membaca. Hairan juga kenapa aku dah kurang minat nak membaca sejak beberapa tahun kebelakangan ini. Mungkin sebab aku bukan Hugh Grant agaknya.
Pagi ni berjaya bangun awal sebab dah lama dah stok kan tenaga batin dari semalam, jadi apabila marathon berlangsung pun takde kesan yang mendalam. Walau bagaimanapun sama je emosi kat opis ni, malas.
Nasib baik takde customer call pergi site (baru 11.45am ni, harapnya kekal sampai ke petang).
Kalau buleh sebenarnya aku nak baring dalam keadaan statik atas 4 kerusi kat bilik meeting sampai pukul 4.30pm. Gilo tak gilo dah la tahap malas ni.
Tetapi di sebalik itu ada beberapa agenda yang perlu aku beri perhatian:

Bushing lower arm dah kaput!
Nak balance balik rim lama aku, dan nak jual rim aku supaya aku dapat duit utk makan nasik instead of makan pasir
Duit raya nak spend kat bebudak limited! (RM5 je sorang yg korang bleh dapat tahun ni...tetapi rasa macam sama je seperti tahun lepas?)
Penjimatan duit minyak yg tak masih belum terbukti selepas pengumuman penurunan RM0.10
Hutang-piutang pinjaman yang aku tak sabar² nak bayar sebelum raya ni, supaya aku dapat meratap hiba pada baki yang tinggal untuk aku guna-rayakan (kalau aku aysirf tu best la gaji aku melimpah ruah, tetapi nak kena bercinta Mr N dia pulak hari-hari, takpelah aku kensel dari cadangan nak jadi aysirf, pulak tu ada baki RM100 lagi ni halamak tangkap nangis betullah)
Duit claim aku tak dapat-dapat lagi ni, sedangkan aku hampir memakan pasir cis lamonyo...

Okeh itu sekian sahaja untuk kali ini, ini pun pasal aku layan sangap kepala walaupun ada kerja depan mata hahaha Selamat Hari Raya Aidilifitri guys, maafkan daku zahir & batin!

Livepool beats Man U (the other day)

2008-09-23T11:47:00.007+08:00

Putting the subject 50% aside, here's a Livepool themed Vespa which parks on daily basis, down at the office compound:

I'd say it's well taken care of & from what I acknowledge about Vespas, it has longer torque curve than most cubs or newer scooters do; hence most of the owners tune this machine to sprint on a distant run. If tuned properly, it may even go faster than a Yamaha 125Z (stock mode).

The Notebook

2008-09-19T18:06:00.003+08:00

I've just landed on a a movie of love story that tickles that soft spot of mine, after being safe for quite sometime. It's a story of how Ryan Gosling (Noah) & Rachel McAdams (Allie) started to meet each other, so in love, separated by situation & reconcile their story with complications of promises & just.

Oh this soooo remind me of my younger self... (when I was acting all complicated & lacking maturity) hahaha!
Whatever it was, tabik to Noah for fulfilling his words without 2nd thoughts. Superb.

Anyway I'm off to the 'buka puasa' at Armada Hotel, later on I will give a bump about my arm bushes that has worned out since past few days :(
Gleduk gleduk gleduk bunyinya...

About a nut

2008-09-08T00:35:00.015+08:00

Last Saturday, I had my rims changed since the 'new' rims were ready after I asked a paintshop to check on the lacquers. Turns out the silicone wipe were repelling the lacquers, so the guy said it's not applicable at the moment. I have no problems with that since the paint looks just fine, so to install the rim without further ado.

Once the present rims where removed, spring isolators were fitted in between the spring coils to stiffen & increase the rate of the springs. I had the idea of putting these on ever since there were significant bouce on certain wavy roads, hence spotted isolators being sold by a fellow 0-100 forummer which then, were delivered after a confirmed deal the night earlier.

The package:

Installed:

As my mechanic was helping with changing rims, we were stalled to the rear right when the alloy nut lug broke into half. Out of ideas, we tried go get it drilled in hope to break the compound to pieces after a friend suggested me the idea over a telephone conversation.

Drilling for 2 hours got us no where, so I had to get a friend's help to send it over to a rim shop near his place to get it removed, which still being planned because I just don't have the time yet.
A bit of preview... :D

Angry over an idiot

2008-08-27T18:29:00.004+08:00

Being tickled by the emotions based on trust & friendship, it's not really hard to get over a bad sequence once in a while but when it comes to a serious & threatening situation, you can't get away with being all fired up to kill somebody or at least break his leg.

Such situation often results as an ink blot that's hard to remove, especially when you have known each other well over light years but still being cheated effortlessly. Seemlessly coming back & forth with logical reasons, it all then boils up to a realization that any good intentions you were trying to serve has instead, become pejorative & disregarded? Damn.

The climax of the frustration is when you find out they don't even consider about anyone else or their safety! All those self-centered decisions & irresponsible misconducts have caused irreversible state. Well, humans just don't realize what they have until they have lost it... I hope such person lives well to understand & appreciate the fact that he is still alive... DUMBASS.

Historical Data

2008-08-13T23:13:00.003+08:00

While digging up my image archive, I stumble upon some images taken not so long ago... this single (just below) was an attempt made during an urban night drive. I remember that I used to be going faster than this, however recently I began to feel that this is a better limit to stick on & less likely to have speed cravings :p

After the fuel hike recently, almost certainly that I'm driving with controlled right foot day after day. And with a tranny driven by 4G93P, it's nice that I am still able to feel some very, very little G-force once in a while...

Anyway, last Friday night I was given task to put on signs leading to my friend's residence, since he was getting married & his family fixed 5 gazebos for dine-in (or more like lunch-in).

Kg Melayu Subang

2008-07-29T13:53:00.004+08:00

Was waiting a friend filling his Kelisa's petrol tank yesterday.
So long haven't record a picture of the car.

Time at the Cyber

2008-07-22T23:35:00.005+08:00

What's been up till now? We're having lots of time in CC lately playing CS...
the addiction came some time ago, but when the CC's operation was shut due to unlicensed game installation, our nights were brought down to disclosed emptiness.

So what did we do?
Spend our nights like we always do, mamak lepaking, do our own stuff which in my case: went for basketball practice, jog around the small lake @ Bukit Jalil, spent more time downloading & watching movies downloaded. I'd like to remind myself there's still tons of titles remaining unlisted as some of them were downloaded by my little sister.

Until last night, I did not remember to clean my PC, spider webs & dust are slotting all over the internals (I did not keep the housing bolted nor mounted). I guess it's about time I go back to review the arrangements of items & housekeeping, though I've been busy like hell lately (is hell really that busy too? -- I don't want the answer)

Between colours

2008-05-14T15:12:00.007+08:00

I'm going for colour repaint on the Putra, so I had these on my mind:

Iridiscent White
Honda New Bronze Metallic
Honda Type-R White
Skyline Calsonic Blue
Subaru Impreza STi Pearl Blue

Which finally resulted in the 1st choice... hihi.
So just some undercoat pictures... not flat grey colour yaa... hahaha

Undercoat

Induction cleaning

2008-04-12T01:17:00.003+08:00

Happen to cross some free time (3 weeks ago, btw) ; I was checking on the idling hence dismantled the induction box & hose to the throttle body...
So just thought I cleaned up the induction system a bit to fill up my time.

Unscrewed the induction box

Washing the induction box

How do I clean the MAF sensor? Simply wipe here & there only!

The result was more stable idling & slightly better response.

The bad news is just after 1 week of that, my car was crashed by a Perodua Kancil driver who happens to be drunk as early as 2015pm in the night. What the heck??
So I'll scrap down the Putra look & go for Wira SE grille with the bumper ... lalala~~

Idling matters

2008-03-24T13:59:00.006+08:00

Apart from having certain errands being forgotten, I had my car undergo an MUT check (possibly tuning) but halted when I was informed the idling stepper controller (or idling stepper motor) possibly out of order.

Without A/C (Normal: go around 12++ step)
On Idle: 0 step
Idle with 2nd fan initiated: 0 step

With A/C (Normal: go around 60++ step)
On Idle: 17 step
Idle with 2nd fan initiated: 39 step

These are readings from MUT-II, and standard figures based from the attending mechanic's explanation.

Stepper motor | Throttle opening | Idling motor

As advised, few possibilities might have contributed this error:
1. Bad wiring
2. Dirty ISC
3. Disfunctional ISC

Stuffs for S@L3

2008-02-27T10:23:00.005+08:00

Myvi rear door moulding (Passo Style).
Rear only, never used. New! RM35.

Drop me an email or leave comment!

Proof or rarity

2007-11-16T12:07:00.005+08:00

In the denial of my humble & strict parking practices, I have today came to a situation where my patience ran out too quick in waiting for a proper parking lot to clear up. So just parked at the roadside (yellow lines, L&G), where I later discover that I have just been booked for it.
And if there is any proof that the car is not as mass produced as any other models of PROTON (please, put aside Tiara & Juara), this is the proof or our rarity. This model, readers, was never produced even 2nd unit of it.

It's one of the best feelings I get towards end of 2007. Smiling. Like a madman.

Touch-ups

2007-11-16T01:21:00.004+08:00

The other day I had a minor accident, cause noticable dent on the front hood. The grill brackets are also broken, so it also had to be replaced. So decided to go for repairs & new grille, and was quoted a price. Since changing colours wouldn't affect the amount, I had it go with black, for bits of personalization & customization of my liking. Not bad eh?

The 2Gs

2007-10-08T10:03:00.003+08:00

Last Friday I took day off to rectify some minors of after-repairs. Before that I had the front grille masked a night before so that I can happily spray flat-black on it in the morning...
So how was the process?

Figure 1 : Grille Masked lazily using masking tape cap ayam

Figure 2 : Painted with Flat Black alternated with Clear coat; total 4 layers.

Figure 3 : Masked removed & let dry for around 30 minutes

Figure 4 : Emblem reassembled.

Figure 5 : Just nize.

To fill up from saving daytime I came up with aerosol-painting (again) the GTI gear console & previous gear knob which had the mounting screw cover stucked. Had that opened by machine shop for RM5.

Figure 6 : Center console boot holder (or what is it called?)

Figure 7 : Gearknob, original colour

Figure 8 : Painted 2 layer, Candy Brown alternate Clear coat

So the day was filled with fixing & painting... plain thirsty. Yeehaw!

Arnold: I'll be bark (back)

2007-10-02T19:46:00.001+08:00

It's back. Just that simple. With some minors that needs attention.

Re-strut-turing

2007-10-01T11:08:00.001+08:00

Last weekend I had a fair share of free time given total off: 2 days from work. To beautify the strut bar I bought not long ago (and to compliment the new enginebay, sorta); I took the idea that came from 5z to get it painted with Titanium Grey. But heck, 1 colour would bore too, right?
Hit the hardware shop & got me 2 instead: Titanium Grey & Candy Brown

Just though a darker scent will help, so flat black & clear coat for the finishing :p

Restoration Works pt 3

2007-09-21T10:54:00.001+08:00

Engine is in!!!
Yes, it's on test run, but not tested on roads yet. Hahah. So happy to see 4G93P back & some are new in the engine bay. Dashboard also have been mounted but without the gadgets, so far.

New radiator, alternator, clutch housing, hoses & pipes for ABS pump has been added, as previously it was taken out. Yee haw!

Below is the clutch housing that has leaked due to breakage. Has to be replaced. Anyone's up for the gears?

Restoration Works pt 2

2007-09-19T06:16:00.000+08:00

After another week in the workshop, the internal bodywork has been sealed with some sort of primer to smoothen out the surface & engine bay was painted. Now the wirings are sorted back on to the chassis before they can drop in the engine. Engine was still laying on the ground with no works though :(

As for the external fender & hood, it will be painted after the engine is installed into the engine bay to prevent unwanted scratches to the bodywork.

Closer look, so far job looks pretty good. Just hoping all same after the drop-in. What engine is coming in, I wonder? LOL

The new suspension still use the old swaybar, which I had doubts to begin with. But guess it'll be OK.

Cabin wires are all over the place... I am yet to familiar. Never will, probably. So maybe I'll wait out another week before getting the car... Can hardly wait now that I see everything is almost in order.

Restoration works

2007-09-14T00:33:00.000+08:00

After 2 weeks of processing the claim & getting the approval, the car made it to the repair bay & it has been a week there now.

Chassis was fixed, where new hood assembled, both side wheel houses & fenders were replaced up to the radiator grille & front bumper. The front lips are yet to be assembled.

The new wheel house was welded and now waiting to be cemented to smoothen the surface.

The drive train support: Cross member & center member. As a comparison, below is the shot of the damaged crossmember:

The engine is however still in the fix. Will update later on when I go to the workshop again next week.

The miraculous Sunday drift

2007-08-21T14:20:00.000+08:00

Last Sunday I was on my way to my third wedding invitation, venue was Kg Malaysia. It was around 3.36pm as I drove from Sg Besi turning to a right U-turn to Besraya, the car skidded and started to drift. It was unstoppable & the attempt to counter was in vain when the tail swings quickly, the car went straight to the side road dividers (6th image)...

The car was sort of jumping at 1 point, and returned to the road while slamming the underneath, resulting on a broken gearbox. The car strayed on the leftside of the road before I halted it with the handbrake. Blur, I looked to the side mirrors for oncoming cars & went out to check the damage. Bad.
GB oil was flowing down, bumpers, fenders, hood out of place. Cross member was also bent badly (2nd image). Surely, there's lot more to consider.

Thank God, I'm still intact.

The LCP

2007-08-14T15:01:00.000+08:00

I have managed to install the lightweight crank pulley, so how does it looks? Below shows the difference of looks between old crank pulley with the new.

Stock crank pulley which weights around 2-3 kilos, made of steel. Due to duration of usage, there was some chips on the edges.

Lightweight crank pulley, made of T7 Aluminium weighs around < 1 kg

Results? The acceleration was slightly faster, due to lighter force applied & torquey feeling was there. No rigorous tests done, though. :P

Minor-minor mod

2007-08-03T15:02:00.000+08:00

Haha just to say that I'm happy that I've received my LCP for RM280 yesterday from my collegue. I haven't weigh it yet so I can't say the difference. Anyway what I'm expecting is slight increase of torque & horsey. Since I haven't mod the intake & exhaust extensively, I'd figure out this might be good for a quicker RPM climb....

Another stuff I just got is a transparent Cam cover (RM50), just to keep it bit ricey in the engine bay along with the fancy coloured crank pulley later on.

I will update further when things gets installed.

Air-conditioning fix

2007-07-26T12:42:00.000+08:00

Lately the I haven't done any major upgrade or pimping, so what I'd like to share today is just air-conditioning service. A fan motor on the radiator has died, but somehow does not displayed any weird symptoms and the air-conditioning still performs.
Anyway for the sake of aging I just had the service, they cleaned up the compressor, blower & condenser all in 1 go, and replaced the malfunctioning fan motor. Cost me RM100 & RM170, respectively.
Pics below shows some part of the d/board has been disassembled in order to get things done. Apologies for the quality pics.

P/S: I was just informed that I have been conned. The fan motor is only RM45!! Fudge!!

Images of breakdown

2007-05-21T14:20:00.000+08:00

As blogged earlier here I present a pics of the old fuel filter:

As recommended actually the fuel filter is to be replaced at 60,000 kms (if not mistaken), cost around RM18. Recently the fuel pump also died in my attempt to start the car going back to my friend's factory, after taken out so here's the malfunctioning fuel pump looks like:

The pump looks great, eh? It's unbelievable that its malfunctioning while looking so good & new. Cost around RM140 but the other day I was conned to the amount of RM250 for the whole job. Nevertheless the work done was good, no extra problems found on ignition & sprinting other than a broken bracket for my rear seat. Argh!! (thank god it has no noise)
And...what else? I've been worrying for quite sometime about the cracks on my bumper, and the gaps I saw through easy detailing on the car:
As I haven't got time to go fiber shop & have the bodywork done, I think I'll just skip it for laters until I get the audio unit working. Lately it has been acting weird, like shutting the sound from hard driving. Suspect the wiring, or even the HU which is not a convenient aspect. As long as the 4G work its magic from a throttle, I'm smiling.
Anyway just 2 days ago the car had a blackout due to shot-circuit of the battery point with the front hood, causing the battery 'kong' (discharged excessively) hence I had to recharge it by jump-starting with another battery. As I was wondering whether the fuse did blow up & who's going to help me, a club member stroll by the scene as he parked his Putra at the very parking space my car stalled (unbelievable!!).
So I was saved from starving & walking some kilos & managed to COD with a forum member later on & go for basketball....

Fuhh... Thank god.

Engine not starting

2007-05-17T15:33:00.000+08:00

Few days back I was taking my time browsing some half-cut shops in USJ with 2 friends, as we attempt to go back to his factory, my car couldn't be started. Seems the ignition is working however there was no response on any ignition, even after hard pedal press.
So suspect that the fuel wasn't pumping in to the throttle body. Darn it, workshop had to be found. Thank god I have my friends with me, we pushed the car around 600 meters to the workshop (half-cut areas sure got few workshops!) and luckily the workshop still not closed (almost 7 o'clock) !
After simple diag of changing relay seems does not solve the problem, afterwards the car had to be left at the workshop with me digging my friends backseat, tired. Main suspect was the fuel pump, which had to be replaced with a used one that cost me almost RM200. New ones could be around RM300-Rm500, according to the mech-assistant... I wouldn't know.
After all that, Remp-IT was on again to make sure the pump works as it supposed to and results are no downing.

Yeah... also cost me an Emergency Leave.
Boss, forgive me.

La³ new radio

2007-05-11T16:34:00.000+08:00

As of today my headunit has already been changed few days back from the SONY Xplod (Jap unit) to stock Waja Campro's Clarion. The sockets match but some additional wiring was accustomed by the bro who did the wiring. Brothers Puchong is where I found the HU, initially sat under a stock VIOS HU. After failed to bargain with the lady shopkeeper, decided this is the one to go with and the wiremen took out the Sony HU where my friend Buyau who was accompanying me drastically bought it from me! Yay!

Below was the conversation held between me (Me) with the shopkeeper (LS):

Me: Eh, this waja hu how much?
LS: RM250.
Me: What? (Good price) Can't give discount?
LS: Cannot, ini sudah murah.
Me: 230 ringgitlah, kasihan saya lor...
LS: Cannot, ini sudah murah...
Me: Come on, you're ma prennn....
LS: Tak boleh laa...tarak untung punya...
Me: Ok, ok. Rm250 siap pasang haa?
LS: Yup, siap pasang.

The HU is capable of using bluetooth, but sadly I have yet to learn how to activate or utilise this feature. MP3 using CD is so much cooler then using modulator man....
Have to say Xplod's bass was a bit better, but sound quality has not been compromised much. Rather than finding a booster, worth my buck changing since I have the HU features I needed, and ready for minor upgrade.

Some stuff to let go

2007-04-06T10:43:00.000+08:00

Hi guys,

Letting go unused stuff, and also some extras:

Alternator / Compressor belt 4PK760 (click for pics) -- RM 11
Alarm Speaker & Relay only (click for pic) -- RM30
Dashboard panel (click for pic) -- RM18 for double din HU only!

Pls email me for inquiries and dealing.
Can COD anywhere possible in KL / PJ.

The not so new Putra

2007-04-04T02:20:00.000+08:00

Just about 2 months ago I got my Proton Putra after a hectic process of getting the loan approved, PUSPAKOM checks & insurance issues done... hahaha so happy got my own ride.
Apart from having my Putra after about 7 years of dreaming, there's quite some plan I have in mind & currently the car has undergo few maintenance works, performing great despite some minor squeaks here & there.

Specs:
Year made: 2000
Mivec1 full bodykit with mivec foglights (don't have switch, though)
Evo1 spoiler
Rota Battle imitation 15 inch

Interior:
Lost a Pioneer headunit & equalizer to robbers, got Sony Xplod cikai replaced
MOMO GSR steering wheel (4 spoke)
SGTI Gear console & gearknob
MP3 Modulator w/ remote (cool item, saves my money for CDs)
Everything else? Standard except for the Barney I hang from the rearview mirror

Some updates on maintenance done:
1. oil change to Castrol MAGNATEC 10W-40 [RM75]
2. spark plugs changed from BKR6EGP (old) to BKR5EGP for [RM35]
3. replaced compressor belt 4PK770 [RM25]
4. replaced alternator belt 4PK760 [RM18]
5. replaced uprated plug cables to stock Mitsubishi (got from halfcut) [Rm50]
6. replaced front bushings, changed springs from potong to cap ayam lowering sport springs (freakin stiff) [RM36, RM183]
7. changed front tyres to Bridgestone MY-01 (Techno replacement model), re-align &amp;amp; camber [RM165 x2, RM12]
8. H1 & low light bulbs [RM8 x2, RM2]

Others:
1. Passanger door window tints (Titanium Elite by Solar Gard) [RM100] due to robbery of my previous headunit, they broke the window, shiats

Alrighty, later I'll post some pics!